 |
     
|
Welcome to the ULTRA URS support pagesView the ULTRA Ultimate Roulette System (ULTRA URS) support pages here. | ||||||||||||||||||||||||||||||||||||||
|
Using the ULTRA URS | |||||||||||||||||||||||||||||||||||||||
|
In this selection we examine how the ULTRA URS performs at different Stake Multiplier settings. The Stake Multiplier setting selects the value that will be used to multiply with the understaking stake values. These new raised stakes are then used with the ULTRA URS in Turbo mode. The higher the multiplier, the greater the turbo stakes. When set to 1, the stakes will remain the same as the understaking stake values, and when set to 10, the resultant stake list values will be ten times that of those in understaking mode. See Figure 231 and Figure 232 for a list of the Turbo stakes at different Stake Multiplier settings.
Figure 231: Stake Multiplier (1 – 9) effect on Turbo stakes
Figure 232: Stake Multiplier (10 – 100) effect on Turbo stakes
With the other settings set to their defaults, i.e. Max stake level = 12, Stake tuning = 1, Speed = “Fast” and Risk level = 1, we will vary the Stake Multiplier setting and see what happens to the ULTRA URS performance figures. The results will be presented as Graphs just as before.
Figure 233: Stake Multiplier at 1
Figure 234: Performance of ULTRA URS with Stake Multiplier set to 1
Figure 235: Stake Multiplier at 2
Figure 236: Performance of ULTRA URS with Stake Multiplier set to 2
Figure 237: Stake Multiplier at 3
Figure 238: Performance of ULTRA URS with Stake Multiplier set to 3
Figure 239: Stake Multiplier at 4
Figure 240: Performance of ULTRA URS with Stake Multiplier set to 4
Figure 241: Stake Multiplier at 5
Figure 242: Performance of ULTRA URS with Stake Multiplier set to 5
Figure 243: Stake Multiplier at 6
Figure 244: Performance of ULTRA URS with Stake Multiplier set to 6
Figure 245: Stake Multiplier at 7
Figure 246: Performance of ULTRA URS with Stake Multiplier set to 7
Figure 247: Stake Multiplier at 8
Figure 248: Performance of ULTRA URS with Stake Multiplier set to 8
Figure 249: Stake Multiplier at 9
Figure 250: Performance of ULTRA URS with Stake Multiplier set to 9
Figure 251: Stake Multiplier at 10
Figure 252: Performance of ULTRA URS with Stake Multiplier set to 10
Figure 253: Stake Multiplier at 15
Figure 254: Performance of ULTRA URS with Stake Multiplier set to 15
Figure 255: Stake Multiplier at 20
Figure 256: Performance of ULTRA URS with Stake Multiplier set to 20
Figure 257: Stake Multiplier at 25
Figure 258: Performance of ULTRA URS with Stake Multiplier set to 25
Figure 259: Stake Multiplier at 30
Figure 260: Performance of ULTRA URS with Stake Multiplier set to 30
Figure 261: Stake Multiplier at 40
Figure 262: Performance of ULTRA URS with Stake Multiplier set to 40
Figure 263: Stake Multiplier at 50
Figure 264: Performance of ULTRA URS with Stake Multiplier set to 50
Figure 265: Stake Multiplier at 100
Figure 266: Performance of ULTRA URS with Stake Multiplier set to 100
You can see how raising your Stake Multiplier affects your long term profits with the ULTRA URS. This is a powerful tool, use it wisely. For those of you asking about the higher Stake Multipliers, rest assured some VIP roulette games allow stake ranges of £50 to £5000 and £100 to £10,000. However, to play the higher multipliers, it is best to use a casino that allows you to play roulette without placing a bet on every spin. In this way you avoid using the £1 bets in the flat betting mode. Simply update ULTRA URS with the spin results and wait until Turbo is activated before playing your high multiplier stakes.
If your casino does not allow you to play roulette without betting on every spin, use the lowest stake allowed for your Turbo mode stakes.
This section displays your bankroll, profit, win ratio and number of spins of the session, (see Figure 1067). The bankroll is how much you started with plus any profit or losses. The profit is how much you have made/lost in the session. The spins represent how many spins you have made since you last reset the URS, (opening the ULTRA URS program automatically resets this counter). The win ratio represents your total wins divided by the number of spins (i.e. if you have won 18 out of 50 spins, your win ratio will be 18/50 = 0.36 or 36%).
Figure 267: The statistics section The ULTRA URS Menu Options We shall now examine the menu options above the fascia of the URS, (see Figure 268).
Figure 268: ULTRA URS menu options
Within the File menu option, you will find Export Statement and Exit. Exit is self explanatory; you use it to shut the ULTRA URS application down. If you have input any results, when you try to exit, and you want to save these input in the form of a statement before you exit, it is advisable that you use the Export Statement menu facility first before you use the Exit option. You can exit anytime you wish however if you don’t export your inputs first you will lose them forever.
The Export Statement facility allows you to export your inputs to a comma delimited file or .CSV file. The format of the file will “ULTRA URS Statement (19 Feb 2007).csv”. The date will be the date you are exporting the data. If you are exporting several times in the same day, change the name of the file manually – i.e. add the time of day to the end of the file name i.e. “ULTRA URS Statement (19 Feb 2007 - 13:21).csv”.
You can manipulate and create charts with the csv data through Microsoft Excel or another spreadsheet program that recognizes .csv’s. You can use the following shortcut keys to access these two features:
Under the Edit menu option, you will find the Undo Last and Reset facilities. You can use the Undo Last feature to undo the last input you made. This feature is useful when you make an input mistake. You can undo it and input the correct result.
The Reset facility clears all the inputs you make from when you open the ULTRA URS program or since your last reset. You will be asked to confirm that you really want to reset. If you confirm that you do, you will be asked if you want to export your statement before you reset.
You can use the following shortcut keys to access these two features:
The tools menu option allows you to access the following facilities:
Settings allow you to fine-tune and change some of ULTRA URS system variables. These are as follows:
Figure 269: The Settings sub-window
The Bankroll is the amount of money you are starting to play roulette with. This is the money you bring to the game. As you play, this Figure will change as you make losses and wins.
ULTRA URS allows you to decide how long or short you want your stake list to be. You can have from 1 stake to 12 stakes in your stake list. The minimum amount of bankroll you need can be calculated using Figure 269.
Figure 270: Bankroll Calculator
Find your stake list length on Figure 270 and multiply the minimum stake in your stake list (the first stake) with the multiplier given in Figure 271.
With practice you will be able to do this calculation quickly. I prefer to use a computer spreadsheet program like Excel to automatically calculate the stakes. You may want to use this method as well.
Let us look at an example of how to calculate your bankroll with a twelve-stake stake list. Example: Calculating your Bankroll If your stake list is as follows:
Figure 271: Example Stake List
To calculate your bankroll if you were using all twelve stakes in the list. Use 257.493 (the multiplier for a twelve stake list from Figure 270) X (multiplied by) 1.0 (your lowest stake in your stake list) = 257.493. Therefore £260 would be sufficient bankroll to use for these stakes.
The Minimum Stake setting allows you to set the amount of your minimum stake. This Figure directly determines the amount of bankroll you will need as well as whether you have enough room left within your casino roulette table limits to actually have the stake list length you are using. If your Minimum Stake is too high, you may not be able to use the full length of your stake list.
The Max Stake Level determines the length of your stake list. You can select stake list lengths from 1 to 12.
Select a language from the list of languages. The language automatically setting you select will change the text of the ULTRA URS program to the selected language. Currently only a few European languages are supported, however, more languages will be added in future updates.
The Turbo activation is controlled through settings under the Tools menu option. These settings allow you to control the Turbo feature in ULTRA URS. Turbo feature allows you to use the ULTRA URS’ built in LMT facility. By playing the ULTRA URS with the Turbo feature you will reduce your losses considerably and ramp up your performance chart. The Turbo feature makes the ULTRA URS more profitable and reduces the risk of losing.
The LMT does not need activating in ULTRA URS. It is always on. You can however control and fine tune it to your personal preferences. The controls can be found under Tools – Settings. Follow the instructions in the ULTRA URS. When the Turbo kicks in, place the bet on the dozen indicated by the ULTRA URS stake marker and use the stake number instructed by the ULTRA URS stake marker.
For the best results whilst using ULTRA URS, you must select the longest stake length (i.e. twelve). This is because ULTRA URS is already employing LMT and has been optimized for full length stake length. Therefore, using a shorter stake length will only result in less profit and more losses. We shall shortly examine how you can apply your own personal LMT with the ULTRA URS.
The Registration menu option allows you to activate the software. The software comes as a trial, allowing 25 bets before resetting. To get full access with no limits to use, you need to activate the program. Use the Registration menu option under Tools to do this. You will need your invoice/transaction number to generate a text code to send to the email address for activation.
Copy and paste your invoice/transaction number into the registration window and click the submit button. A text will be generated below in the display window. Use your mouse to highlight and paste all the text to the email address given at the site.
You will receive a registration code back from the ULTRA URS Helpdesk. Copy the activation code from this email and input into the registration window, then click the Register button. Your ULTRA URS program will be activated for the machine you activated it on if you correctly carried out the registration process.
You can access the Ultimate Roulette System support pages at www.ultimategamblingsystems.com through the Help menu option. The about option under Help allows you to see the version and copyright details for the ULTRA URS program.
Before you play with ULTRA URS, first make sure you have sufficient funds. You will know this after deciding on what Stake Multiplier to use. Do not play with more than 20% of your bankroll. That is to say if you were to have a complete loss of all stakes within Turbo mode, only a fifth of your bankroll should be affected. Secondly set the Speed, Risk and stake length. Leave stake length at 12 for best results. Risk level at 1 is the safest and wisest option; anything else is taking unnecessary risks.
After setting up the Turbo settings, you are ready to play ULTRA URS. When the message says “Place your bets” (see Figure 272), place your bets on the dozens highlighted by the two red selectors, using the stake highlighted in the stake list. The graph will display a pictorial illustration of your balance.
Figure 272: Place your bets message
Figure 273: The red selector
Figure 286 illustrates the red selector with the stake value displayed on it in white. In your online casino account, place a bet on the dozen suggested by the red selector – with the stake suggested on the selector or highlighted in the stake list (see Figure 287).
Figure 274: Highlighted stake in the stake list
If you win, you will see the "You are a winner!!!" message appear at the top of the ULTRA URS application as illustrated in Figure 275.
Figure 275: Winner message
If you lose, you will see the "Sorry, you lose." message illustrated in Figure 276.
Figure 276: Loser message
To input results into the ULTRA URS, simply double click the number that won, or the dozen that won. When you move your mouse curser over the input sections of the roulette table in ULTRA URS a pop up will appear advising you to “Double-click to submit result” (see Figure 277).
Figure 277: Popup advising on how to input results
You may double click on individual numbers (i.e. 0-36) or the dozens (i.e. 1-12, 13-24 or 25-36). Figure 278 illustrates these areas.
Figure 278: The roulette table
You can also use the manual submission number selector to key in the number that won then click the Submit button (see Figure 279).
Figure 279: The manual submission option
As you input results you will see your inputs represented in the historical input display illustrated in Figure 280.
Figure 280: The results history
You will see your running total at the bottom of the screen in the information section. This will show your real-time bankroll, profit, number of spins and win ratio as illustrated in Figure 281.
Figure 281: The information and statistic section
| |||||||||||||||||||||||||||||||||||||||
|
|
|
Terms and Conditions Copyright © 2008 UltimateGamblingSystems.com All Rights Reserved Privacy Policy |